EliteGuard Stainless Steel Band & Protective Case for Apple Watch Ultra 3, Ultra 2, Ultra, Series 11–4 (49mm–40mm)
FREE delivery
Avontic Apple Watch Steel Collection
Stainless Steel Link Band + TPU Protective Bumper + Adjustment Tool
Available for Exact Apple Watch Sizes from 40mm to 49mm
Flexible TPU Frame Protection.
EliteGuard combines a stainless steel link bracelet with a model-specific TPU bumper case and an included adjustment tool. The bracelet creates a more traditional timepiece profile, while the flexible bumper helps reduce direct contact around the Apple Watch outer frame, bezel edge, and corners without covering the display.
Choose the exact generation and millimeter size engraved on the back of the watch. The band connector may fit several related Apple Watch sizes, but the included TPU case must match the watch body exactly.
Why EliteGuard
An all-metal case-and-band system can feel substantial and highly structured. EliteGuard uses stainless steel where it matters visually—the bracelet—and flexible TPU around the watch body, creating a more approachable everyday combination with easier case installation.
The included link tool helps tailor the bracelet to the wrist, while the bumper remains removable for cleaning or for occasions when the original Apple Watch case should remain visible.
Designed for broad Apple Watch support
Stainless Steel Bracelet
Linked metal construction creates a polished, traditional-watch appearance for work, travel, dinner, events, and everyday wear.
Flexible TPU Bumper
Wraps the outer Apple Watch frame and corners while leaving the screen open for direct touch access.
Included Adjustment Tool
Allows removable links to be adjusted gradually for a closer fit. Keep all removed links, pins, and collars.
Model-Specific Case Openings
The exact-size bumper preserves access to the crown, buttons, speakers, microphones, sensors, and charging area.
Broad Finish Selection
Thirteen solid and two-tone finishes include gold, black, silver, starlight, pink, rose-gold, and contrast combinations.
Multiple Generations
Dedicated options span Ultra 49mm, Series 11/10, Series 9–7, Series 6–4/SE, and older Series 3–1 42mm.
Band family and case fit are different
Band Connector
Apple groups several case sizes into related band families, so the bracelet connector can overlap across generations.
TPU Bumper
The protective case follows the watch body, crown, speaker, and button geometry. It must match the exact listed generation and size.
Compatibility comes first
The live page organizes compatibility correctly by Apple Watch family. Match the option to the engraving on the back of the device rather than selecting by wrist size or approximate appearance.
Ultra 3 / 2 / 1
49mm only.
Series 11 & 10
42mm or 46mm.
Series 9 / 8 / 7
41mm or 45mm.
Series 6 / SE / 5 / 4
40mm or 44mm.
Series 3 / 2 / 1
Dedicated older 42mm option where shown.
Do not substitute another case size
A 42mm Series 10/11 case and a 42mm Series 1–3 case are different products. Choose the generation-specific 42mm option rather than relying on the shared number alone.
Installation and first-use check
1. Confirm Generation and Size
Read the rear engraving and select the matching size group and finish.
2. Resize with the Tool
Remove a small number of links at a time and test the fit after each adjustment.
3. Install the TPU Bumper
Align the crown and control openings, then flex the case around the watch without forcing the display edge.
4. Pull-Test and Function-Test
Check both band connections, clasp, crown, buttons, touchscreen, audio openings, sensors, and charging.
What’s included
1 × stainless steel link band
1 × model-specific TPU protective bumper
1 × bracelet adjustment tool
Apple Watch, charger, front screen protector, and unrelated accessories are not included. The TPU bumper is open-face and does not create sealed or waterproof coverage.
Protection and care
EliteGuard helps reduce exposure to everyday scratches, scuffs, light bumps, and surface contact but cannot prevent every type of damage. Remove the TPU case after sweat, rain, swimming, sunscreen, or workouts so trapped moisture and debris can be cleaned and dried. Wipe the bracelet and clasp, inspect the pins and connectors, and expect small finish marks from normal metal wear over time.
Choose the Exact Apple Watch Fit and Build a More Refined Everyday Setup.
Match the rear engraving, select the preferred finish, and use the included tool to tailor the bracelet.
Sizing Guide for Apple Watch
| Model | Case Sizes (Engraved) | Order Band Size | Order Case/Protector |
|---|---|---|---|
| Apple Watch Ultra 3 / Ultra 2 / Ultra (1) | 49 mm | 49 mm (also fits 42/44/45/46 mm) | 49 mm only |
| Series 11 | 42 mm, 46 mm | 42 mm or 46 mm | Match engraving (42 mm or 46 mm) |
| Series 10 | 42 mm, 46 mm | 42 mm or 46 mm | Match engraving (42 mm or 46 mm) |
| Series 9 / 8 / 7 | 41 mm, 45 mm | 41 mm or 45 mm | Match engraving (41 mm or 45 mm) |
| SE (2nd & 1st Gen) | 40 mm, 44 mm | 40 mm or 44 mm | Match engraving (40 mm or 44 mm) |
| Series 6 / 5 / 4 | 40 mm, 44 mm | 40 mm or 44 mm | Match engraving (40 mm or 44 mm) |
| Series 3 / 2 / 1 | 38 mm, 42 mm | 38 mm or 42 mm | Match engraving (38 mm or 42 mm) |
Quick Example:
If your Apple Watch says 41 mm on the back → Order a 41 mm band and 41 mm case.
Choose options